'cookieChoices = {};' MEASUREMENT OF LIGHT WHEN SHOOT - Moving forward

Header Ads

MEASUREMENT OF LIGHT WHEN SHOOT

2
all we want to do the activities we forget measurement photo
light at the time we did the photos. if we forget measurement
light on melkukan photos then we may get results
less satisfactory in obtaining good results. maybe here I
will tell a good way to regulate the light measurement
well like this.
Bracketing indeed implies as aids for
photographer to get good lighting in the shooting –
no excess or lack of light. Because the formulation is necessary
note that the measurement of light in a photo shoot that well it does
indispensable even if lighting needs are
the main thing. And, do bracketing is a way out for
get the exposure in the shooting as needed.
Indeed, to do the bracketing is not difficult. quite a
photographer perform light measurements corresponding received normal size
camera and then subtracting one stop and one stop exaggerating the size of the
normal light by opening or changing large diaphragm and
shutter speed.
Although the bracketing is also still can be done by using
exposure compensation button and change the ISO sensitivity, in general
with a digital camera is enough to do with change
aperture and shutter speed of the camera. In the photo “Silhouette”
for example, as a size standard lighting in shooting
actually the photograph that failed because only describe the subject
as dark as ink blob. However, that error can
Just be “legitimate” and is considered good, justified and can be enjoyed
as a result of a successful photograph and contains art if it
penggarapannya designed for it.
For the case of subjects such as the photo “Silhouette” is, if the photographer
requires accurate shooting results by displaying the subject
clear and bright, it can only be done by opening
wider aperture and shutter speed in order to slow down
Lighting in the shooting be enough.
Can also be done by using the flash from the front
subject, in parallel with the camera. But in this way will only
produce the subject of the picture that looks unusual, bright and clear but
“Arty”.
In photography or shooting is done by using the camera
digital, particularly on the subject is white, it is very
is required by way of bracketing shooting. It was none other for
avoid generating a silhouette, because digital cameras are particularly vulnerable to
White light. Therefore for color accuracy and lighting in
using digital photos need to previously undertaken the standardization of color
black and white, or more commonly known as white balance
abbreviated WB to obtain accurate color and of course also
lighting.
After standardizing the colors do then to perform bracketing
the same technique as was done at shooting using
a conventional camera. That is by doing a photo shoot on the light
measured normal, then the first measured light stops below normal and
measurable light 1 stop above normal.
White Balance
White balance (WB) can indeed meant nothing to the camera
conventional, but the digital camera is very important. because it
it is the key to success, especially in terms of side shooting
color and light. But before going any further with regard to
white balance, please note that the WB setting can not necessarily
correcting all the colors that we want in the shooting. On
some specific situations, such as a polarizing filter remains
required in digital shooting.
There are two methods or models approach to the use of WB, namely auto or
manual. With auto when there are errors in the camera computer
interpret WB, when the object image dominated by a certain color and
no whit white color that can be used as reference by
computer processing. For example on the atmosphere of the afternoon before the sun
sunset, the color scheme is likely to be dominated by
membrane warm colors when needed this result can be corrected
using photo processing software on the computer.
With the manual, selecting the appropriate color temperature or close
light conditions at the time of the shooting. Because it takes a little
Skills estimate how many degrees (Kelvin) light around an object
being photographed for manual settings.
WB in the shooting using a digital camera is closely related to
bracketing which is an alternative to shooting to get
captured with accurate lighting. This is one
the key to success in shooting will be more perfect
if the photographer had arranged WB appropriately.
Even with digital cameras correcting or alternative
Lighting can be done by converting it using computers,
as we know, various shortcomings often result in photos
be not sharp or the other side which causes extra time
process. So better do a photo shoot with bracketing
so no need to allocate more time and get
photos with color standards, quality and good sharpness.
Whoever the photographer would want the results as perfect shooting
maybe. Because digital cameras are highly susceptible to white light and
shooting is done against the light, then in digital photography
bracketing action should still be conducted by the photographer. The goal
for the perfection of the shooting.

Tidak ada komentar